This work reports on a theoretical investigation of superlattices based on Cd1-xZnxS quantum dots embedded in an insulating material. This system, considered as a series of flattened cylindrical quantum dots with a finite barrier at the boundary, is studied using the tight binding approximation. The ground miniband width and the longitudinal effective mass, in the case of the heavy and light holes, have been computed as a function of zinc composition for different inter-quantum dot separations. An analysis of the results shows that the Zn composition x = 0.8 are appropriate to give rise a superlattice behavior for the light holes. As for the heavy holes, it has been showed the strong localization character of theses carriers in the Cd1-xZnxS nanostructures.
Published in | International Journal of Materials Science and Applications (Volume 3, Issue 5) |
DOI | 10.11648/j.ijmsa.20140305.30 |
Page(s) | 274-278 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2014. Published by Science Publishing Group |
Quantum Dots, Superlattices, Cd1-xZnxS, Heavy and Light Holes, Tight Binding Approximation, Specific Devices
[1] | A. Sakly, N. Safta and A. Ben Lamine. (2004), Interpretation of the bowing phenomenon in Cd1-xZnxS alloy, J. Mater. Sci.-Mater. Electron. 15 : 351. |
[2] | N. A. Shah, A. Nazir, W. Mahmood, W. A. Syed, S. Butt, Z. Ali and A. Maqsood. (2012), Physical properties and characterization of Ag doped CdS thin films, J. Alloys Compd. 512: 27. |
[3] | T. P. Kumar, S. Saravanakumar and K. Sankaranayanan. (2011), Effect of annealing on the surface and band gap alignment of CdZnS thin films, Appl. Surf. Sci. 257 (6) : 1923. |
[4] | B. Bhattacharjee, S. K. Mandal, K. Chakrabarti, D. Ganguli and S. Chaudhui. (2002), Optical properties of Cd1−xZnxS nanocrystallites in sol–gel silica matrix, J. Phys. D: Appl. Phys. 35: 2636-2642. |
[5] | H. H. Gürel, Ö. Akinci and H. Ünlü. (2008), Tight binding modeling of CdSe/ZnS and CdZnS/CdS II–VI heterostructures for solar cells: Role of d-orbitals, Thin Solid Films 516 : 7098. |
[6] | M. Gunasekaram, M. Ichimura. (2007), Photovoltaic cells based on pulsed electrochemically deposited SnS and photochemically deposited CdS and Cd1−xZnxS, Sol. Energy Mater. Sol. Cells. 91 : 774. |
[7] | N. Kohara, T. Negami, M. Nishitani and T. Wada. (1995), Preparation of Device – Quality Cu (In, Ga)Se2 Thin films deposited by Coevaporation with composition Monitor, Japan. J. appl. Phys. 34 : L 1141 |
[8] | V. Alberts, R. herberhonz, T. Walter and H. W. Schock. (1997), Device characteristics of In-rich CuInSe2 based solar cells, J. Phys. D: Appl. Phys. 30 : 2156. |
[9] | J. Lee, W. Song and J. Yi. (2003), Growth and properties of the Cd1-xZnxS films for solar cell applications, Thin Solid Films 431-432 : 349. |
[10] | A. J. Peter and C. W. Lee.(2012), Electronic and optical properties of CdS/CdZnS nanocrystals, Chinese Phys. B 21: 087302. |
[11] | F. Scotognella, G. Lanzani, L. Manna, F. Tassone and M. Zavelani-Rossi. (2012), Study of higher-energy core states in CdSe/CdS octapod nanocrystals by ultrafast spectroscopy, Eur. Phys. J. B. 85: 128. |
[12] | L. Cao, S. Huang and S. E. (2004), ZnS/CdS/ZnS quantum dot quantum well produced in inverted micelles, J. colloid Interface Sci. 273: 478-482. |
[13] | H. Kumano, A. Ueta and I. Suemune. (2002), Modified spontaneous emission properties of CdS quantum dots embedded in novel three-dimensional microcavities, Physica E 13: 441-445 |
[14] | Y. C. Zhang, W. W. Chen and X. Y. Hu. (2007), In air synthesis of hexagonal Cd1 − xZnxS nanoparticles from single-source molecular precursors, Mater. Lett. 61: 4847-4850 |
[15] | C. S. Pathak, D. D. Mishra, V. Agarawala, M. K. Mandal. (2012), Mechanochemical synthesis, characterization and optical properties of zinc sulphide nanoparticles, Indian J. Phys 86: 777-781. |
[16] | S. Roy, A. Gogoi and G. A. Ahmed. (2010), Size dependent optical characterization of semiconductor particle: CdS embedded in polymer matrix, Indian J. Phys. 84: 1405-1411 |
[17] | A. U. Ubale and A. N. Bargal. (2010), Characterization of nanostructured photosensitive cadmium sulphide thin films grown by SILAR deposition technique, Indian J. Phys. 84: 1497-1507 |
[18] | K.K Nanda, S.N. Sarangi, S. Mohanty, S.N. Sahu. (1998), Optical properties of CdS nanocrystalline films prepared by a precipitation technique, Thin Solid Films 322: 21-27. |
[19] | N. Safta. (2004), Fluctuations mode of the gap as a function of composition of Cd1-xZnxS ternaries, Ann. Chim. Sci. Mat. 29 (5) 105-112 |
[20] | H. Yükselici, P. D. Persans and T. M. Hayes.(1995), Optical studies of the growth of Cd1-xZnxS nanocrystals in borosilicate glass, Phys. Rev. B. 52: 11763. |
[21] | N. Safta, A. Sakly, H. Mejri and Y. Bouazra. (2006), Electronic and optical properties of Cd1-xZnxS nanocrystals, Eur. Phys. J. B 51: 75-78 |
[22] | A. Sakly, N. Safta, A. Mejri, H. Mejri, A. Ben Lamine. (2010), The Excited Electronic States Calculated for Cd1-xZnxS Quantum Dots Grown by the Sol-Gel Technique, J. Nanomater, ID746520. |
[23] | N. Safta, A. Sakly, H. Mejri and M. A. Zaïdi. (2006), Electronic properties of multi-quantum dot structures in Cd 1-xZnxS alloy semiconductors, Eur. Phys. J. B 53: 35 – 38 |
[24] | A. Sakly, N. Safta, H. Mejri, A. Ben Lamine. (2009), The electronic band parameters calculated by the Kronig–Penney method for Cd1−xZnxS quantum dot superlattices, J. Alloys Compd. 476: 648–652. |
[25] | A. Sakly, N. Safta, H. Mejri, A. Ben Lamine. (2011), The electronic states calculated using the sinusoidal potential for Cd1−xZnxS quantum dot superlattices, J. Alloys Compd.509: 2493–2495 |
[26] | S. Marzougui, N. Safta. (2014), The electronic band parameters calculated by the Triangular potential model for Cd1-xZnxS quantum dot superlattices, IOSR-JAP 5 (5) : 36-42 |
[27] | S. Marzougui, N. Safta. (2014), The electronic band parameters calculated by the Tight Binding Approximation for Cd1-xZnxS quantum dot superlattices, IOSR-JAP 6 (2) : 15-21 |
[28] | S. Marzougui, N. Safta. (2014), A theoretical study of the electronic properties of Cd1-xZnxS quantum dot superlattices, American Journal of Nanoscience and Nanotechnology 2 (3) : 45-49. |
[29] | S. Marzougui. (2011), A study of the excited states in the flattened cylindrical quantum dots of Cd1-xZnxS, Master, University of Monastir. |
APA Style
Saber Marzougui, Nabil Safta. (2014). A Theoretical Study of the Heavy and Light Hole Properties of Cd1-xZnxS Quantum Dot Superlattices. International Journal of Materials Science and Applications, 3(5), 274-278. https://doi.org/10.11648/j.ijmsa.20140305.30
ACS Style
Saber Marzougui; Nabil Safta. A Theoretical Study of the Heavy and Light Hole Properties of Cd1-xZnxS Quantum Dot Superlattices. Int. J. Mater. Sci. Appl. 2014, 3(5), 274-278. doi: 10.11648/j.ijmsa.20140305.30
AMA Style
Saber Marzougui, Nabil Safta. A Theoretical Study of the Heavy and Light Hole Properties of Cd1-xZnxS Quantum Dot Superlattices. Int J Mater Sci Appl. 2014;3(5):274-278. doi: 10.11648/j.ijmsa.20140305.30
@article{10.11648/j.ijmsa.20140305.30, author = {Saber Marzougui and Nabil Safta}, title = {A Theoretical Study of the Heavy and Light Hole Properties of Cd1-xZnxS Quantum Dot Superlattices}, journal = {International Journal of Materials Science and Applications}, volume = {3}, number = {5}, pages = {274-278}, doi = {10.11648/j.ijmsa.20140305.30}, url = {https://doi.org/10.11648/j.ijmsa.20140305.30}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140305.30}, abstract = {This work reports on a theoretical investigation of superlattices based on Cd1-xZnxS quantum dots embedded in an insulating material. This system, considered as a series of flattened cylindrical quantum dots with a finite barrier at the boundary, is studied using the tight binding approximation. The ground miniband width and the longitudinal effective mass, in the case of the heavy and light holes, have been computed as a function of zinc composition for different inter-quantum dot separations. An analysis of the results shows that the Zn composition x = 0.8 are appropriate to give rise a superlattice behavior for the light holes. As for the heavy holes, it has been showed the strong localization character of theses carriers in the Cd1-xZnxS nanostructures.}, year = {2014} }
TY - JOUR T1 - A Theoretical Study of the Heavy and Light Hole Properties of Cd1-xZnxS Quantum Dot Superlattices AU - Saber Marzougui AU - Nabil Safta Y1 - 2014/09/30 PY - 2014 N1 - https://doi.org/10.11648/j.ijmsa.20140305.30 DO - 10.11648/j.ijmsa.20140305.30 T2 - International Journal of Materials Science and Applications JF - International Journal of Materials Science and Applications JO - International Journal of Materials Science and Applications SP - 274 EP - 278 PB - Science Publishing Group SN - 2327-2643 UR - https://doi.org/10.11648/j.ijmsa.20140305.30 AB - This work reports on a theoretical investigation of superlattices based on Cd1-xZnxS quantum dots embedded in an insulating material. This system, considered as a series of flattened cylindrical quantum dots with a finite barrier at the boundary, is studied using the tight binding approximation. The ground miniband width and the longitudinal effective mass, in the case of the heavy and light holes, have been computed as a function of zinc composition for different inter-quantum dot separations. An analysis of the results shows that the Zn composition x = 0.8 are appropriate to give rise a superlattice behavior for the light holes. As for the heavy holes, it has been showed the strong localization character of theses carriers in the Cd1-xZnxS nanostructures. VL - 3 IS - 5 ER -