Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors

Monica Adela Enache; Sorin Enache; Ion Vlad

doi:doi:10.11648/j.jeee.20130104.14

| Peer-Reviewed

Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors

Monica Adela Enache, Sorin Enache, Ion Vlad

Published in Journal of Electrical and Electronic Engineering (Volume 1, Issue 4)

Received: 12 July 2013 Published: 20 October 2013

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper presents some conclusions of a larger review article which regards possibilities for speed adjustment at synchronous reluctance motors. In the first part there are detailed the command variants by modifying the supply voltage and frequency (open loop control and vectorial control). There are reviewed the variants with and without position sensors. In the second part there is presented the possibility for speed modification by changing the poles number. There is presented a constructive variant of rotor for a reluctance synchronous machine with changing number of poles. The paper ends with conclusions corresponding to the study achieved.

Published in	Journal of Electrical and Electronic Engineering (Volume 1, Issue 4)
DOI	10.11648/j.jeee.20130104.14
Page(s)	85-89
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Reluctance Synchronous Motor, Open Loop Control, Vectorial Control

References

[1]	Betz, R.E.: Theoretical Aspects of Control of Synchronous Reluctance Machines, Proc. IEE, Vol. B-139, n. 4, 1992, pp. 355-364.
[2]	Cheok, A.D., Fukuda, Y.: A new torque and flux control method for switched reluctance motor drives, IEEE Transactions on Power Electronics, Volume 17, Issue 4, 2002, ISSN 0885-8993, pp. 543 – 557.
[3]	Campeanu, A., Cautil, I., Vlad, I., Enache, S.: Modelling and simulating alternating current electrical machines, Romanian Academy Publishing House, Bucharest, 2012, ISBN 978-973-27-2233-6.
[4]	Enache, M.A., Enache, S., Dobriceanu, M.: Considerations regarding dynamic regimes of reluctance synchronous motors, 19-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia (Italy), 11-13 June, , pp. 284-289.
[5]	Enache, M. A., Campeanu, A., Enache, S., Vlad, I.: Possibilities for reluctance synchronous machines parameters experimental determination, Anals of the University of Craiova, Series Electrical Engineering, Year 36, No. 36, 2012, ISSN 1842-4805, pp. 176-181.
[6]	Enache, S., Campeanu, A., Vlad, I.; Enache, M. A.: Possibility for analysis of the reluctance synchronous motors dynamic stability, Advanced Topics in Electrical Engineering (ATEE), 7th International Symposium, 2011, pp. 1-6.
[7]	Enache, S., Campeanu, A., Vlad, I., Enache, M. A.: Reluctance synchronous motors modelling and analysis, Anals of the University of Craiova, Series Electrical Engineering, Year 36, No. 36, 2012, ISSN 1842-4805, pp. 170-175.
[8]	Jovanovic, M.G, Ahmed, M.M.R.: Sensorless Speed Control Strategy for Brushless Double Fed Reluctance Machines, Electric Machines & Drives Conference, 2007, IEMDC '07, 3-5 May 2007, pp. 1514.
[9]	Magureanu, R., Vasile, N. Permanent magnet and reluctance synchronous motors, Technical Publishing House, Bucharest, 1982.
[10]	McCann, R.A., Islam, M.S.; Husain, I.: Application of a sliding-mode observer for position and speed estimation in switched reluctance motor drives, IEEE Transactions on Industry Applications, Volume 37, Issue 1, ISSN: 0093-9994, pp. 51–58.
[11]	Vas, P.: Sensorless Vector and Direct Torque Control, Oxford University Press, 1998.
[12]	Vas, P.: Vector Control of AC Machines, Clarendon Press, 1990.

Cite This Article

Plain Text BibTeX RIS

APA Style

Monica Adela Enache, Sorin Enache, Ion Vlad. (2013). Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors. Journal of Electrical and Electronic Engineering, 1(4), 85-89. https://doi.org/10.11648/j.jeee.20130104.14

Copy | Download

ACS Style

Monica Adela Enache; Sorin Enache; Ion Vlad. Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors. J. Electr. Electron. Eng. 2013, 1(4), 85-89. doi: 10.11648/j.jeee.20130104.14

Copy | Download

AMA Style

Monica Adela Enache, Sorin Enache, Ion Vlad. Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors. J Electr Electron Eng. 2013;1(4):85-89. doi: 10.11648/j.jeee.20130104.14

Copy | Download

@article{10.11648/j.jeee.20130104.14,
  author = {Monica Adela Enache and Sorin Enache and Ion Vlad},
  title = {Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {1},
  number = {4},
  pages = {85-89},
  doi = {10.11648/j.jeee.20130104.14},
  url = {https://doi.org/10.11648/j.jeee.20130104.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20130104.14},
  abstract = {This paper presents some conclusions of a larger review article which regards possibilities for speed adjustment at synchronous reluctance motors. In the first part there are detailed the command variants by modifying the supply voltage and frequency (open loop control and vectorial control). There are reviewed the variants with and without position sensors. In the second part there is presented the possibility for speed modification by changing the poles number. There is presented a constructive variant of rotor for a reluctance synchronous machine with changing number of poles. The paper ends with conclusions corresponding to the study achieved.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors
AU  - Monica Adela Enache
AU  - Sorin Enache
AU  - Ion Vlad
Y1  - 2013/10/20
PY  - 2013
N1  - https://doi.org/10.11648/j.jeee.20130104.14
DO  - 10.11648/j.jeee.20130104.14
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 85
EP  - 89
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20130104.14
AB  - This paper presents some conclusions of a larger review article which regards possibilities for speed adjustment at synchronous reluctance motors. In the first part there are detailed the command variants by modifying the supply voltage and frequency (open loop control and vectorial control). There are reviewed the variants with and without position sensors. In the second part there is presented the possibility for speed modification by changing the poles number. There is presented a constructive variant of rotor for a reluctance synchronous machine with changing number of poles. The paper ends with conclusions corresponding to the study achieved.
VL  - 1
IS  - 4
ER  -

Copy | Download

Author Information

Monica Adela Enache

University of Craiova, Faculty of Electrical Engineering, Craiova, Romania
Sorin Enache

University of Craiova, Faculty of Electrical Engineering, Craiova, Romania
Ion Vlad

University of Craiova, Faculty of Electrical Engineering, Craiova, Romania

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Monica Adela Enache, Sorin Enache, Ion Vlad. (2013). Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors. Journal of Electrical and Electronic Engineering, 1(4), 85-89. https://doi.org/10.11648/j.jeee.20130104.14

Copy | Download

ACS Style

Monica Adela Enache; Sorin Enache; Ion Vlad. Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors. J. Electr. Electron. Eng. 2013, 1(4), 85-89. doi: 10.11648/j.jeee.20130104.14

Copy | Download

AMA Style

Monica Adela Enache, Sorin Enache, Ion Vlad. Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors. J Electr Electron Eng. 2013;1(4):85-89. doi: 10.11648/j.jeee.20130104.14

Copy | Download

@article{10.11648/j.jeee.20130104.14,
  author = {Monica Adela Enache and Sorin Enache and Ion Vlad},
  title = {Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {1},
  number = {4},
  pages = {85-89},
  doi = {10.11648/j.jeee.20130104.14},
  url = {https://doi.org/10.11648/j.jeee.20130104.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20130104.14},
  abstract = {This paper presents some conclusions of a larger review article which regards possibilities for speed adjustment at synchronous reluctance motors. In the first part there are detailed the command variants by modifying the supply voltage and frequency (open loop control and vectorial control). There are reviewed the variants with and without position sensors. In the second part there is presented the possibility for speed modification by changing the poles number. There is presented a constructive variant of rotor for a reluctance synchronous machine with changing number of poles. The paper ends with conclusions corresponding to the study achieved.},
 year = {2013}
}

Copy | Download

TY  - JOUR
T1  - Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors
AU  - Monica Adela Enache
AU  - Sorin Enache
AU  - Ion Vlad
Y1  - 2013/10/20
PY  - 2013
N1  - https://doi.org/10.11648/j.jeee.20130104.14
DO  - 10.11648/j.jeee.20130104.14
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 85
EP  - 89
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.20130104.14
AB  - This paper presents some conclusions of a larger review article which regards possibilities for speed adjustment at synchronous reluctance motors. In the first part there are detailed the command variants by modifying the supply voltage and frequency (open loop control and vectorial control). There are reviewed the variants with and without position sensors. In the second part there is presented the possibility for speed modification by changing the poles number. There is presented a constructive variant of rotor for a reluctance synchronous machine with changing number of poles. The paper ends with conclusions corresponding to the study achieved.
VL  - 1
IS  - 4
ER  -

Copy | Download